| Dimensions (W x H x D) |
498 x 168*5 x 492 mm (19 5/8? x 6 5/8?*5 x 19 3/8? ) |
| Power consumption |
TBD |
| LENS |
2.0x manual zoom (throw ratio: 1.46–2.94:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm |
| Resolution |
1920 x 1200 pixels |
| Operating environment |
Operating temperature: 0–40 °C (32–104 °F),operating humidity: 10–80 % (no condensation) (TBD) |
| Keystone correction range |
Vertical: ±40 °, Horizontal: ±20 °. When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously,correction cannot be made exceeding a total of ±60 °. |
| Installation |
Ceiling/floor, front/rear, free 360-degree installation |
| Cabinet materials |
Molded plastic |
| Applicable software |
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software |
| Contrast Ratio*1 |
20,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON) |
| Power supply |
AC 100–240 V, 50/60 Hz |
| Light source |
Laser diodes |
| Terminals | LAN |
RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible |
| DLP™ chip | Panel size |
17.0 mm (0.67 in) diagonal (16:10 aspect ratio) |
| DLP™ chip | Display method |
DLP™ chip x 1, DLP™ projection system |
| Terminals | HDMI IN |
HDMI 19-pin x 2 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*4 ), CEC supported |
| Terminals | DIGITAL LINK |
RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible,4K/60p signal input*4 |
| Light output |
6,000 lm*1/6,200 lm (Center)*2 |
| Operation noise*1 |
30 dB (Quiet Mode) (TBD), 35 dB (Normal Mode) (TBD) |
| Projector type |
1-Chip DLP™ projector |
| DLP™ chip | Number of Pixels |
2,304,000 (1920 x 1200 pixels) |
| Screen size [diagonal] |
1.02–7.62 m (40–300 in), 16:10 aspect ratio |
| Center-to-corner zone ratio*1 |
90 % |
| Time until light output declines to 50 %*3 |
20,000 hours (NORMAL) |
| Note |
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode. *3 Aroundthis time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [ON], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light outputdeclines to 50 % varies depending on environment. *4 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®. *5 With legs at shortest position. *6 Average value. May differ depending on the actual unit. |
| Weight*6 |
Approx. 16.6 kg (36.6 lbs) (TBD) |
| Terminals | COMPUTER 1 IN |
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/YC) |
| Terminals | VIDEO IN |
Pin jack x 1 (composite video) |
| Terminals | AUDIO IN 1 |
Pin jack x 2 (L, R) |
| Terminals | SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | USB |
USB connector (Type A) x 1 (Output 5 V/2 A) |
| Terminals | AUDIO OUT |
M3 x 1 (Variable) |
| Terminals | Computer 2 IN/1 OUT |
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/YC) |
| Lens shift | Vertical(From the origin point of the lens mounter) |
+64 %, -44 % (manual) |
| Lens shift | Horizontal(From the origin point of the lens mounter) |
+34 %, -27 % (manual) |
| Terminals | Audio In 2/3 |
M3 x 1/M3 x 1 |
This product is sourced in Australia and carries a full Australian Manufacturers Warranty