The VPL-PHZ11 laser projector is a versatile, affordable choice for installation in a wide range of education, business and entertainment environments. The powerful Z-Phosphor laser light source is teamed with Sony's advanced BrightEra 3LCD projection engine to deliver extremely bright, detail-packed WUXGA resolution images with generous 5000 lumens brightness and rich, stable colours. This laser light source allows up to 20,000 hours* of virtually zero maintenance operation without the worry of sudden lamp failures.

Very high image quality with Sony's advanced BrightEra 3LCD projection engine and Z-Phosphor laser light source

Constant Brightness (maintains the same brightness throughout the 20,000 hours (at light output mode "Middle") hours recommended life span)

Up to 20,000 hours* operation with virtually no maintenance

Hassle-free automatic filter cleaning

Supports HDBaseT

Quiet operation

Contrast Ratio 500,000:1

Display System
Display system	3 LCD system
Size of effective display area	0.76” (19.3 mm) x 3 BrightEra LCD Panel, Aspect ratio: 16:10
Number of pixels	6,912,000 (1920 x 1200 x 3) pixels

Projection Lens
Focus	Manual
Zoom - Powered/Manual	Manual
Zoom - Ratio	Approx. x 1.45
Throw ratio	1.28:1 to 1.88:1
Lens shift - Powered/Manual	Manual
Lens shift - Range Vertical	+20% to +55%
Lens shift - Range Horizontal	+/- 10%

Light Source
Type	Laser diode

Filter Cleaning & Maintenance
Filter cleaning / replacement cycle (Max.)	20,000 H (service maintenance)

Screeen Size
Screen size	40" to 300" (1.02 m to 7.62 m)

Light output	Mode: Standard 5,000 lm
Color light output	Mode: Standard 5,000 lm

Contrast ratio (full white / full black) *1
Contrast ratio (full white / full black)	8:1

Speaker
Speaker	16 W (monaural)

Display resolution
Computer signal input	Maximum display resolution: 1920 x 1200 dots *2
Video signal input	NTSC, PAL, SECAM, 480/60p, 576/50i, 720/60p, 720/50p, 1080/60i, 1080/50i The following items are available for HDMI input only; 1080/60p, 1080/50p, 1080/24p

Color System
Color System	NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60

Keystone correction (Max.)
Horizontal	+/- 30 degrees
Vertical	+/- 20 degrees

INPUT OUTPUT (Computer/Video/Control)
INPUT A	RGB / Y PB PR input connector:Mini D-sub 15 pin (female) Audio input connector: Stereo mini jack
INPUT B	HDMI input connector: HDMI 19-pin, HDCP support Audio input connector: HDMI audio support
INPUT C	HDMI input connector: HDMI 19-pin, HDCP support Audio input connector: HDMI audio support
INPUT D	HDBaseT interface connector: RJ45, 4 play (Video, Audio, LAN, Control)
VIDEO IN	Video input connector: BNC Audio input connector: Shared with INPUT A
OUTPUT	Audio output connector: Stereo mini jack
REMOTE	D-sub 9-pin (male) / RS232C
LAN	RJ45, 100BASE-TX (Shared with INPUT D)
USB	TYPE-A
USB	TYPE-B

Acoustic Noise
Lamp Mode: Standard / Middle / Low	36 dB / 28 dB / 25 dB

Operating temperature / Operating humidity
Operating temperature / Operating humidity	0°to 40°C (32°F to 104°F) / 20 % to 80 % (no condensation)

Storage temperature / Storage humidity
Storage temperature / Storage humidity	-10° to +60°C (14°F to 140°F) / 20 % to 80 % (no condensation)

Power requirements
Power requirements	AC 100 V to 240 V, 4.3 A to 1.7 A, 50 Hz / 60 Hz

Power Consumption
AC 100 V to 120 V	Mode: Standard: 424 W
AC 220 V to 240 V	Mode: Standard: 403 W

Power Consumption (Standby Mode)
AC 100 V to 120 V	0.5 W (when "Standby mode" is set to "Low")
AC 220 V to 240 V	0.5 W (when "Standby mode" is set to "Low")

Power Consumption (Networked Standby Mode)
AC 100 V to 120 V	12.5 W (LAN) 13.2 W (optional WLAN module) 16.8 W (HDBaseT) 17.4 W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")
AC 220 V to 240 V	11.9W (LAN) 12.6W (optional WLAN module) 17.0W (HDBaseT) 17.6W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard")

Standby Mode / Networked Standby Mode Activated
Standby Mode / Networked Standby Mode Activated	Approx. 2 Minutes

Heat dissipation
AC 100 V to 120 V	1446 BTU/h
AC 220 V to 240 V	1374 BTU/h

Dimensions (W x H x D)
Dimensions (W x H x D) (without protrusions)	510 x 113 x 354.6 mm (20 3/32 x 4 7/16 x 13 31/32 inches)

Mass
Mass	Approx. 8.7kg (19 lb)

Supplied accessories
Remote commander	RM-PJ8

Notes 1 The value is average 2 Available for VESA Reduced Blanking signal. This projector has a total constant brightness of 4500 lumens for up to 14,000 hours depending on usage environment. This enables users to experience the projectors’ original level of image quality for years, while achieving a maximum 5,000 lumens brightness when the constant brightness mode is off.

Last updated: Saturday, 19 September 2020

Do you need a Projector Screen as well? Try our Screen Site at

Note: For mobile presentations we recommend the SG Projector Stand which can be found here.

Warranty

This product is sourced in Australia and carries a full Australian Manufacturers Warranty

Brochure