| Specification |
Description |
| Dimensions (W x H x D)
|
PT-RZ790: 498 x 200*6 x 581 mm (19 19/32? x 7 7/8 ? *6 x 22 7/8? ) (with supplied lens)PT-RZ790L: 498 x 200*6 x 538 mm (19 19/32? x 7 7/8 ? *6 x 21 3/16? ) (without lens) |
| Power consumption
|
920W(TBD) |
| LENS
|
PT-RZ990: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mmPT-RZ990L: Optional powered zoom/focus lenses |
| Resolution
|
1920 x 1200 pixels |
| Operating environment
|
TBD |
| Keystone correction range
|
Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035),Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020) |
| Installation
|
Ceiling/floor, front/rear, free 360-degree installation |
| Cabinet materials
|
Molded plastic |
| Applicable software
|
Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ |
| Contrast Ratio*1
|
10,000:1 (Full On/Full Off, Dynamic Contrast Mode: ON) |
| Power supply
|
AC 100–240 V, 50/60 Hz |
| Light source
|
Laser diodes |
| Terminals | DVI-D IN
|
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| Terminals | LAN
|
RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible |
| DLP™ chip | Panel size
|
17.0 mm (0.67 in) diagonal ( Panel size 16:10 aspect ratio) |
| DLP™ chip | Display method
|
DLP™ chip x 1, DLP™ projection system |
| Terminals | SDI IN
|
BNC x 1: 3G/HD/SD-SDI input |
| Terminals | HDMI IN
|
HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K signal input*5 ) |
| Terminals | DIGITAL LINK
|
RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible,4K signal input*5 |
| Terminals | REMOTE 2 IN
|
D-sub 9-pin (female) x 1 for external control (parallel) |
| Light output
|
9,400 lm*1/10,000 lm (Center)*2 |
| Terminals | REMOTE 1 IN
|
M3 x 1 for wired remote control |
| Terminals | REMOTE 1 OUT
|
M3 x 1 for link control (for wired remote control) |
| Operation noise*1
|
41 dB (Normal) / 37 dB (Quiet1) / 35 dB (Quiet2) |
| Projector type
|
1-Chip DLP™ projector |
| DLP™ chip | Number of Pixels
|
2,304,000 (1920 x 1200 pixels) |
| Screen size [diagonal]
|
1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio |
| Center-to-corner zone ratio*1
|
90 % |
| Time until light output declines to 50 %*3
|
20,000 hours (NORMAL)/24,000 hours (ECO) |
| Weight*7
|
PT-RZ990: Approx. 23.1 kg (50.9 lbs) (with supplied lens) (TBD)PT-RZ990L: Approx. 22.3 kg (49.2 lbs) (without lens) (TBD) |
| Lens shift*4 | Vertical(From the origin point of the lens mounter)
|
+50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered) |
| Lens shift*4 | Horizontal(From the origin point of the lens mounter)
|
+30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered) |
| Note
|
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode. *3 Aroundthis time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [ON], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light outputdeclines to 50 % varies depending on environment. *4 Lens shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE035. *5 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI ®.*6 Excluding legs. *7 Average value. May differ depending on the actual unit. |
| Terminals | SERIAL/MULTI PROJECTOR SYNC IN
|
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | SERIAL/MULTI PROJECTOR SYNC OUT
|
D-sub 9-pin (male) x 1 for link control |
| Keystone correction range with optional ET-UK20 Upgrade Kit
|
Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055),
Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055)
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
Last updated: Wednesday, 24 April 2024
| Do you need a Projector Screen as well? Try our Screen Site at |
 |
Note: For mobile presentations we recommend the SG Projector Stand which can be found here.
This product is sourced in Australia and carries a full Australian Manufacturers Warranty